SX165
June 5, 2015MX225-HS
June 17, 2015MX225
Available are various configurations of FOT (fiber-optic taper) coupled modules. The MX series of detectors use 3 x 3 or 4 x 4 arrays of fused fiber-optic taper elements to make a very large active area. Unlike other multi-element detectors, the images produced have no gaps between the modules. Rayonix factory calibration is permanent and suitable for all X-ray sources.
Available are various configurations of FOT (fiber-optic taper) coupled modules. The MX series of detectors use 3 x 3 or 4 x 4 arrays of fused fiber-optic taper elements to make a very large active area. Unlike other multi-element detectors, the images produced have no gaps between the modules. Rayonix factory calibration is permanent and suitable for all X-ray sources.
- Higher resolution
- No gaps
- Excellent linearity
- Low noise
- Factory calibration
Technical Specifications
Type | 9 CCDs bonded to fiber-optic tapers |
---|---|
Fiber-optic Taper Demagnification Ratio | 2:7:1 |
Phosphor | Standard 40μm thick, custom options available |
PSF (FWHM) Depends on Phosphor Option Chosen | 100μm with standard phosphor, 65μm with 25μm phosphor |
Active Imaging Surface | 225mm x 225mm |
Sensor Operating Temperature | -80°C |
Readout Electronics (# of Channels) | 18 |
Readout Noise | 10e⁻/pixel |
Dark Current | <0.01e⁻/pixel/second (12keV) |
DQE | 0.8 |
Sensitivity (Gain) | 6e⁻/12keV photon |
Full Well Capacity | 360ke⁻/pixel |
Cooling | Closed-cycle refrigeration |
1 X 1 | |
Readout Speed
Pixel Size Frame Size |
2 seconds
37μm 6144 x 6144 pixels |
2 X 2 | |
Readout Speed
Pixel Size Frame Size |
1 second
73μm 3072 x 3072 pixels |
3 X 3 | |
Readout Speed
Pixel Size Frame Size |
0.5 second
110μm 2046 x 2046 pixels |
4 X 4 | |
Readout Speed
Pixel Size Frame Size |
0.3 second
146μm 1536 x 1536 pixels |
Detector Head | |
Height x Width x Depth
Approximate Weight |
46cm x 32cm x 40cm
52kg |
Electronics / Cooling Assembly | |
Height x Width x Depth
Approximate Weight |
117cm x 64cm x 64cm
215kg
|